View C0603Z5U250-154ZNR_3760741.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

6 operating temperature range: -55c to +125c temperature coefficient: 0 15% ? c max. temperature voltage coefficient: x7r not applicable dissipation factor: for 50 volts and 100 volts: 2.5% max.; for 25 volts: 3.0% max.; for 16 volts: 3.5% max.; for 10 volts: 5.0% max.; for 6.3 volts: 10% max. for values > 10f and voltages 10v, the d.f. is 10% max. insulation resistance: >1000 ohms f or 100 g ohms, whichever is less at 25c, vdcw. (the ir at 125c is 10% of the value at 25c) ageing: 2.5% per decade hour, typical withstanding voltage: >2.5 times vdcw test parameters: * 1khz 100hz at 1.0 0.2 vrms > 100 pf, 25c capacitance tolerance: j,k,m x7r: specifications: -55c -15% -10% -5% 0% 5% 10% 15% -25 c 0 c 25 c 50 c 75c 100c 125c typical capacitance change vs. temperature operating temperature range: +10c to +85c temperature coefficient: +22% - 56% ? c max. dissipation factor: 4.0% max. insulation resistance: >100 ohms f or 10 g ohms, whichever is less at 25c, vdcw. ageing: 5% per decade hour, typical withstanding voltage: >2.5 times vdcw test parameters: 1khz 100hz at 0.5 0.1 vrms, 25c capacitance tolerance: m,z z5u: specifications: -55c -80% -60% -40% -20% 0% 20% -25 c 0 c 25c typical capacitance change vs. temperature 50 c 75c 100c 125c operating temperature range: -30c to +85c temperature coefficient: +22% - 82% ? c max. dissipation factor: for 25 volts and 50 volts: 5% max.; for 16 volts: 7% max.; for 10 volts: 9% max.; for 6.3 volts: 11% max. for higher cap values > 10f, the d.f. is 20% max. insulation resistance: >100 ohms f or 10 g ohms, whichever is less at 25c, vdcw. ageing: 7% per decade hour, typical withstanding voltage: >2.5 times vdcw test parameters: * 1khz 100hz at 1.0 0.2 vrms, 25c capacitance tolerance: m,z y5v: specifications: -55c -100% -60% -80% -40% -20% 0% 40% 20% -25 c 0 c 25c typical capacitance change vs. temperature 50 c 75c 100c 125c operating temperature range: -55c to +125c temperature coefficient: 0 30ppm / c temperature voltage coefficient: 0 30ppm / c dissipation factor: 0.1% max. insulation resistance: >1000 ohms f or 100 g ohms, whichever is less at 25c, vdcw. (the ir at 125c is 10% of the value at 25c) ageing: none withstanding voltage: >2.5 times vdcw test parameters: 1mhz 100khz at 1.0 0.2 vrms 100 pf, 25c 1khz 100hz at 1.0 0.2 vrms > 100 pf, 25c capacitance tolerance: b,c,d,f,g,j,k -55c -15% -10% -5% 0% 5% 10% 15% -25 c 0 c 25 c 50 c 75c 100c 125c typical capacitance change vs. temperature np0/c0g: specifications: operating temperature range: -55c to +85c temperature coefficient: 0 15% ? c max. temperature voltage coefficient: x5r not applicable dissipation factor: for 50 volts and 100 volts: 2.5% max.; for 25 volts: 3.0% max.; for 16 volts: 3.5% max.; for 10 volts: 5.0% max.; for 4.0 volts and 6.3 volts: 10% max. for values > 10f and voltages 10v, the d.f. is 10% max. insulation resistance: >1000 ohms f or 100 g ohms, whichever is less at 25c, vdcw. (10,000 ohms at 125c) ageing: 2.5% per decade hour, typical withstanding voltage: >2.5 times vdcw test parameters: * 1khz 100hz at 1.0 0.2 vrms > 100 pf, 25c capacitance tolerance: k,m x5r: specifications: -55c -15% -10% -5% 0% 5% 10% 15% -25c 0c 25c 50c 75c 100c 125c typical capacitance change vs. temperature multilayer chip capacitors have a low residual inductance, an excellent frequency response and minimal stray capacitance since there are no leads. these characteristics enable design to be very close to the theoretical values of the capacitors. 6 ceramic chip capacitors * test parameters for hi-caps: x7r, x5r and y5v 1khz 100hz at 1.0 0.2 vrms < 10uf (10 v min.) 1khz 100hz at 0.5 0.1 vrms < 10uf (6.3v max.) 120hz 24hz at 0.5 0.1 vrms 10uf all components in this section are rohs compliant per the eu directives and definitions.
size a b w f e po pz d t p 0.25 0.05 0.45 0.05 8.0 0.2 3.5 0.1 1.75 0.1 4.0 0.1 2.0 0.05 1.5 + 0.1 1.15 max 2.0 0.05 01005 - 0.0 (0.010 .002) (0.018 .002) (.315 .008) (.138 .004) (.069 .004) (.157 .004) (.039 .002) ( .064 + .004 ) (.045 max ) (.079 .002) - .000 0.37 0.05 0.67 0.05 8.0 0.2 3.5 0.1 1.75 0.1 4.0 0.1 2.0 0.05 1.5 + 0.1 1.15 max 2.0 0.05 0201 - 0.0 (0.014 .002) (0.026 .002) (.315 .008) (.138 .004) (.069 .004) (.157 .004) (.039 .002) ( .064 + .004 ) (.045 max ) (.079 .002) - .000 0.65 0.1 1.10 0.2 8.0 0.2 3.5 0.1 1.75 0.1 4.0 0.1 2.0 0.05 1.5 + 0.1 1.15 max 2.0 0.05 0402 - 0.0 (.026 .004) (.043 .008) (.315 .008) (.138 .004) (.069 .004) (.157 .004) (.039 .002) ( .064 + .004 ) (.045 max ) (.079 .002) - .000 1.10 0.2 1.90 0.2 8.0 0.2 3.5 0.1 1.75 0.1 4.0 0.1 2.0 0.05 1.5 + 0.1 1.15 max 4.0 0.1 0603 - 0.0 (.043 .008) (.075 .008) (.315 .008) (.138 .004) (.069 .004) (.157 .004) (.079 .002) ( .064 + .004 ) (.045 max ) (.157 .004) - .000 1.16 0.2 2.4 0.2 8.0 0.2 3.5 0.1 1.75 0.1 4.0 0.1 2.0 0.05 1.5 + 0.1 1.15 max 4.0 0.1 0805 - 0.0 (.046 .008) (.095 .008) (.315 .008) (.138 .004) (.069 .004) (.157 .004) (.079 .002) ( .064 + .004 ) (.045 max ) (.157 .004) - .000 2.0 0.2 3.6 0.2 8.0 0.2 3.5 0.1 1.75 0.1 4.0 0.1 2.0 0.05 1.5 + 0.1 1.15 max 4.0 0.1 1206 - 0.0 (.079 .008) (.142 .008) (.315 .008) (.138 .004) (.069 .004) (.157 .004) (.079 .002) ( .064 + .004 ) (.045 max ) (.157 .004) - .000 unit: mm (inch) paper tape carrier dimensions (8mm) w f p direction of feed top tape embossed paper center of cavity d t to pz e po 10 pitches cumulative tolerance 0.008 ( 0.2 ) a b t tape b min c a (7") a (13") d min n min g t max 8mm 0.3 13 .05 178 2.0 330 2.0 20.2 50 10 1.5 14.9 (.012) (.512 .02) (7 .079) (13 .08) (.795) (1.97) (.394 .059) (.587) 12mm 0.3 13 .05 178 2.0 330 2.0 20.2 50 10 1.5 14.9 (.012) (.512 .02) (7 .079) (13 .08) (.795) (1.97) (.394 .059) (.587) reel dimensions unit: mm (inch) b d g t a full radius c n the following letters define thickness as signified below: code: c d e f g h i j k l m n o p q r s t 6 dimension: .015 .020 .026 .030 .035 .040 .045 .050 .055 .060 .065 .070 .075 .080 .085 .090 .095 .100 .023 C * optional identifier min./ max. thickness C designates minimum thickness * designates maximum thickness c0805 c0g 500 101 j n h p * series temperature rated voltage capacitance tolerance code: termination marking** packaging optional identifier see chart characteristic 1st two digits (pico - farads) *b = 0.1 pf n = nickel barrier, 6 = eia j code d = paper tape ( 10" reel ) are significant 1st two digits *c = 0.25 pf tinned termination leave blank if e = embossed tape ( 7" reel ) followed by are significant, *d = 0.5 pf composition is no marking p = paper tape ( 7" reel ) number of zeroes. followed by f = 1% 100% matte tin (sn) r = paper tape ( 13" reel ) 4r0 = 4.0 vdcw number of zeroes. g = 2% ? p = palladium silver u = embossed tape ( 13" reel ) 6r3 = 6.3 vdcw 101 = 100 pf j = 5% ? g = gold over nickel 100 = 10 vdcw r denotes decimal k = 10% pb: 90% tin (sn)/10% lead (pb) termination 160 = 16 vdcw 6r8 = 6.8 pf m = 20% 250 = 25 vdcw n = 30% standard termination finish for this product is 500 = 50 vdcw z = +80 - 20% 100% matte tin (sn). if a 100% tin designation is 630 = 63 vdcw p = +100 - 0% required, replace the n with sn. 101 = 100 vdcw * for capacitance values 201 = 200 vdcw below 10 pf only. 10pf 251 = 250 vdcw also available in d tol. how to order size 01005 0201* 0402* 0603 0805 1206 1210 1812 2221 tape size 8mm 8mm 8mm 8mm 8mm 8mm 8mm 12mm 12mm min qty 20,000? 15,000 5000 3000 2000 2000 1000 1000 1000 per reel max qty 20,000? 15,000 10,000 4000 5000 5000 5000 3000 1000 per reel 7 in. reel quantities** * * quantity dependent on chip thickness * 0201 and 0402 pitch (p) is .079" .004" (2.0 0.1mm) ? smaller quantities may be available. please contact your sales person. taping specifications size a b w f e po pz d to t p 1.48 0.2 2.3 0.2 8.0 0.2 3.5 .0.1 1.75 0.1 4.0 0.1 2.0 0.05 1.5 + 0.1 2.5 max 0.6 max 4.0 0.1 0805 - 0.0 (.058 .008) (.091 .008) (.315 .008) (.138 .004) (.069 .004) (.157 .004) (.079 .002) ( .06 + .004 ) (.098 max ) (.024 max ) (.157 .004) - .000 2.0 0.2 3.6 0.2 8.0 0.2 3.5 .0.1 1.75 0.1 4.0 0.1 2.0 0.05 1.5 + 0.1 2.5 max 0.6 max 4.0 0.1 1206 - 0.0 (.079 .008) (.142 .008) (.315 .008) (.138 .004) (.069 .004) (.157 .004) (.079 .002) ( .06 + .004 ) (.098 max ) (.024 max ) (.157 .004) - .000 2.9 0.2 3.6 0.2 8.0 0.2 3.5 .0.1 1.75 0.1 4.0 0.1 2.0 0.05 1.5 + 0.1 2.5 max 0.6 max 4.0 0.1 1210 - 0.0 (.114 .008) (.142 .008) (.315 .008) (.138 .004) (.069 .004) (.157 .004) (.079 .002 ) ( .06 + .004 ) (.098 max ) (.024 max ) (.157 .004) - .000 3.6 0.2 4.9 0.2 12.0 0.3 5.6 .0.1 1.75 0.1 4.0 0.1 2.0 0.05 1.5 + 0.1 3.8 max 0.6 max 8.0 0.1 1812 - 0.0 (.142 .008) (.193 .008) (.472 .012) (.221 .004) (.069 .004) (.157 .004) (.079 .002) ( .06 + .004 ) (.150 max ) (.024 max ) (.315 .004) - .000 embossed carrier dimensions (8mm & 12mm) 7 ** 0201 and 0402 size capacitors cannot be marked please note: venkel offers engineering kits for this product. see page 120 for details. all tape and reel specifications must be adhered to per eia-481-1-a as noted and stated in the chip resistor section on page 61. ? pd/ag & gold terminations have limited values available. please consult your salesperson. note: see the web site for soldering information. 0603 size and smaller are not recommended for wave soldering. ? see pages 20-21 for our standard high voltage ceramic chip capacitors.
8 ceramic chip capacitors np0/c0g dielectric t l w end band values that are typically available. 25v available in 25v only. note: * for additional values that may be available, please consult your salesperson. (all measurements in inches) size 01005 ( 0.0008) 0201 ( 0.002) 0402 ( 0.004) 0504 ( 0.008) 0603 ( 0.006) 0805 ( 0.008) 1206 ( 0.008) 1210 (0.008) 1812 (0.012) l .016 .024 .040 .053 .063 .080 .126 .126 .177 w .008 .012 .020 .040 .032 .050 .063 .098 .126 t (max)* .008 .012 .025 .040 .033 .055 .070 .075 .085 min e/b .002 .002 .004 .005 .008 .020 .010 .020 .010 .020 .010 .024 .015 vdcw (max) 16v 25v 50v 25v 50v 50v 100v 50v 100v 25v 50v 100v 50v 100v 50v 100v 50v 100v <--------------------------------------------------------------------------------------------------------cap. code--------------------------------------------------------------------------------------------------------> 0r1 <--------------------------------------------------------------------------------------------------------cap. value-------------------------------------------------------------------------------------------------------> 0.1pf 0r2 0.2pf 0r3 0.3pf 0r4 0.4pf 0r5 0.5pf 1r0 1.0pf 1r2 1.2 1r5 1.5 1r8 1.8 2r2 2.2 2r7 2.7 3r3 3.3 3r9 3.9 4r7 4.7 5r6 5.6 6r8 6.8 8r2 8.2 100 10pf 120 12 150 15 180 18 220 22 270 27 330 33 390 39 470 47 560 56 680 68 820 82 101 100pf 121 120 151 150 181 180 221 220 271 270 331 330 391 390 471 470 561 560 681 680 821 820 102 1000pf 122 1200 152 1500 182 1800 222 2200 272 2700 332 3300 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 * va l u e s s h o w n t o t h e l e f t a re a l s o a v a i l a b l e f o r 0 2 0 1 s i z e 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 * va l u e s s h o w n t o t h e l e f t a re a v a i l a b l e f o r 0 1 0 0 5 s i z e
9 ceramic chip capacitors np0/c0g dielectric note: due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. minimum order quantities may apply. t l w end band values that are typically available. 25v available in 25v only. (all measurements in inches) size 0201 ( 0.002) 0402 ( 0.004) 0504 ( 0.008) 0603 ( 0.006) 0805 ( 0.008) 1206 ( 0.008) 1210 (0.008) 1812 (0.012) 2220 / 2221 (0.016) l .024 .040 .053 .063 .080 .126 .126 .177 .225 / .225 w .012 .020 .040 .032 .050 .063 .098 .126 .200 / .210 t (max)* .012 .025 .040 .033 .055 .070 .075 .085 .108 /.108 min e/b .002 .004 .005 .008 .020 .010 .020 .010 .020 .010 .024 .015 .025 .015 vdcw (max) 25v 25v 50v 50v 100v 25v 50v 25v 50v 100v 50v 100v 50v 100v 50v 100v 50v 100v <--------------------------------------------------------------------------------------------cap. code--------------------------------------------------------------------------------------------> 392 <--------------------------------------------------------------------------------------------cap. value-------------------------------------------------------------------------------------------> 3900 472 4700 562 5600 682 6800 822 8200 103 .01f 123 .012 153 .015 183 .018 223 .022 273 .027 333 .033 393 .039 473 .047 563 .056 683 .068 823 .082 104 .100f 25v 124 .120 154 .150 184 .180 224 .220 274 .270 334 .330 394 .390 474 .470 564 .560 684 .680 824 .820 105 1.00f 125 1.20 155 1.50 185 1.80 225 2.20 335 3.30 395 3.90 475 4.70 685 6.80 106 10.0f 156 15.0f 226 22.0f 476 47.0f 107 100.0f
ceramic chip capacitors 10 x7r dielectric * for values above 1uf, thickness may be greater than specified above. t(max): 0603 C 0.048" 0805 C 0.075" note: due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. minimum order quantities may apply. all components manufactured with the x7r dielectric are also available as an x5r dielectric. t l w end band values that are typically available. x5r available in x5r only. see x5r chart on page 14, for all values 1f and above (all measurements in inches) size 01005 ( 0.0008) 0201 ( 0.002) 0402 ( 0.004) 0504 ( 0.008) 0603 ( 0.006) 0805 ( 0.008) l .016 .024 .040 .053 .063 .080 w .008 .012 .020 .040 .032 .050 t (max)* .008 .012 .025 .040 .035 .055 min e/b .002 .002 .004 .005 .008 .020 .010 vdcw (max) 6.3v 6.3v 10v 16v 25v 16v 25v 50v 25v 50v 100v 10v 16v 25v 50v 100v 25v 50v 100v <----------------------------------------------------------------------------------------------cap. code----------------------------------------------------------------------------------------------> 101 <----------------------------------------------------------------------------------------------cap. value---------------------------------------------------------------------------------------------> 100pf 121 120 151 150 181 180 221 220 271 270 331 330 391 390 471 470 561 560 681 680 821 820 102 1000pf x5r 122 1200 152 1500 x5r 182 1800 222 2200 x5r 272 2700 332 3300 x5r 392 3900 472 4700 x5r 562 5600 682 6800 x5r 822 8200 103 .01f x5r 123 .012 153 .015 x5r 183 .018 223 .022 x5r 273 .027 333 .033 x5r
ceramic chip capacitors 11 x7r dielectric * for values above 1uf, thickness may be greater than specified above. t(max): 0603 C 0.048" 0805 C 0.075" note: due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. minimum order quantities may apply. all components manufactured with the x7r dielectric are also available as an x5r dielectric. t l w end band values that are typically available. x5r available in x5r only. see x5r chart on page 14, for all values 1f and above (all measurements in inches) size 0201 ( 0.002) 0402 ( 0.004) 0603 ( 0.006) 0805 ( 0.008) l .024 .040 .063 .080 w .012 .020 .032 .050 t (max)* .012 .025 .035 .055 min e/b .002 .004 .008 .020 .010 vdcw (max) 4v 6.3v 10v 4v 6.3v 10v 16v 25v 6.3v 10v 16v 25v 50v 100v 6.3v 10v 16v 25v 50v 100v <----------------------------------------------------------------------------------------------cap. code------------------------------------------------------------------------------------------> 393 <----------------------------------------------------------------------------------------------cap. value------------------------------------------------------------------------------------------> .039 x5r 473 .047 x5r 563 .056 683 .068 823 .082 104 .100f x5r 124 .120 154 .150 x5r x5r 184 .180 224 .220 x5r x5r x5r 274 .270 334 .330 x5r 394 .390 474 .470 x5r x5r 564 .560 684 .680 x5r x5r 824 .820 105 1.00f x5r x5r x5r x5r x5r 125 1.20 155 1.50 185 1.80 225 2.20 x5r x5r x5r 335 3.30 x5r x5r 475 4.70 x5r x5r x5r x5r x5r 685 6.80 106 10.0f x5r x5r x5r 156 15.0f 226 22.0f 476 47.0f 107 100.0f
ceramic chip capacitors x7r dielectric * for values above 1uf, thickness may be greater than specified above. t(max): 1206 C 0.110" 1812 C 0.130" 1210 C 0.125" 2220 C 0.135" note: due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. minimum order quantities may apply. all components manufactured with the x7r dielectric are also available as an x5r dielectric. t l w end band values that are typically available. x5r available in x5r only. see x5r chart on page 14, for all values 1f and above (all measurements in inches) size 1206 ( 0.008) 1210 (0.008) 1812 (0.012) 2220 / 2221 (0.016) l .126 .126 .177 .225 / .225 w .063 .098 .126 .200 / .210 t (max)* .070 .075 .085 .108 /.108 min e/b .020 .010 .020 .010 .024 .015 .025 .015 vdcw (max) 10v 16v 25v 50v 100v 10v 16v 25v 50v 100v 6.3v 10v 16v 25v 50v 100v 16v 25v 50v 100v <----------------------------------------------------------------------------------------------cap. code----------------------------------------------------------------------------------------------> 102 <----------------------------------------------------------------------------------------------cap. value---------------------------------------------------------------------------------------------> 1000pf 122 1200 152 1500 182 1800 222 2200 272 2700 332 3300 392 3900 472 4700 562 5600 682 6800 822 8200 103 .01f 123 .012 153 .015 183 .018 223 .022 273 .027 333 .033 393 .039 473 .047 563 .056 683 .068 823 .082 104 .100f 124 .120 154 .150 184 .180 224 .220 274 .270 334 .330 12
ceramic chip capacitors 13 x7r dielectric * for values above 1uf, thickness may be greater than specified above. t(max): 1206 C 0.110" 1812 C 0.130" 1210 C 0.125" 2220 C 0.135" note: due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. minimum order quantities may apply. all components manufactured with the x7r dielectric are also available as an x5r dielectric. t l w end band values that are typically available. x5r available in x5r only. see x5r chart on page 14, for all values 1f and above (all measurements in inches) size 1206 ( 0.008) 1210 (0.008) 1812 (0.012) 2220 / 2221 (0.016) l .126 .126 .177 .225 / .225 w .063 .098 .126 .200 / .210 t (max)* .070 .075 .085 .108 /.108 min e/b .020 .010 .020 .010 .024 .015 .025 .015 vdcw (max) 6.3v 10v 16v 25v 50v 100v 6.3v 10v 16v 25v 50v 100v 6.3v 10v 16v 25v 50v 100v 16v 25v 50v 100v <-----------------------------------------------------cap. code--------------------------------------------------> 394 <-----------------------------------------------------cap. value--------------------------------------------------> .390 474 .470 564 .560 684 .680 824 .820 105 1.00f 125 1.20 155 1.50 185 1.80 225 2.20 335 3.30 475 4.70 685 6.80 106 10.0f x5r x5r x5r 156 15.0f x5r 226 22.0f x5r x5r x5r 476 47.0f x5r x5r x5r 107 100.0f
ceramic chip capacitors 14 x5r dielectric (1f and above) note: due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. minimum order quantities may apply. all components manufactured with the x7r dielectric are also available as an x5r dielectric. t l w end band values that are typically available. for values less than 1f, see x7r chart on pages 10C13. (all measurements in inches) size 0201 ( 0.002) 0402 ( 0.004) 0603 ( 0.006) 0805 ( 0.008) 1206 ( 0.008) 1210 (0.008) 1812 (0.012) l .024 .040 .063 .080 .126 .126 .177 w .012 .020 .032 .050 .063 .098 .126 t (max) .012 .025 .048 .075 .110 .125 .130 min e/b .002 .004 .008 .020 .010 .020 .010 .020 .010 .024 .015 vdcw (max) 4v 6.3v 4v 6.3v 10v 4v 6.3v 10v 16v 25v 6.3v 10v 16v 25v 6.3v 10v 16v 25v 6.3v 10v 16v 25v 6.3v 10v 16v <------------cap. code-----------> 105 <------------cap. value-----------> 1.00f 125 1.20 155 1.50 185 1.80 225 2.20 335 3.30
ceramic chip capacitors 15 x5r dielectric (1f and above) note: due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. minimum order quantities may apply. all components manufactured with the x7r dielectric are also available as an x5r dielectric. t l w end band values that are typically available. for values less than 1f, see x7r chart on pages 10C13. (all measurements in inches) size 0402 ( 0.004) 0603 ( 0.006) 0805 ( 0.008) 1206 ( 0.008) 1210 (0.008) 1812 (0.012) 2220 / 2221 (0.016) l .040 .063 .080 .126 .126 .177 .225 / .225 w .020 .032 .050 .063 .098 .126 .200 / .210 t (max) .025 .048 .075 .110 .125 .130 .135 min e/b .004 .008 .020 .010 .020 .010 .020 .010 .024 .015 .025 .015 vdcw (max) 4v 6.3v 4v 6.3v 10v 4v 6.3v 10v 16v 25v 6.3v 10v 16v 25v 6.3v 10v 16v 25v 6.3v 10v 16v 25v 6.3v 10v 25v 50v <-----------------cap. code-----------------> 395 <-----------------cap. value-----------------> 3.90 475 4.70 685 6.80 106 10.0f 156 15.0f 226 22.0f 476 47.0f 107 100.0f
ceramic chip capacitors 16 z5u dielectric note: due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. minimum order quantities may apply. t l w end band values that are typically available. (all measurements in inches) size 0504 ( 0.008) 0603 ( 0.006) 0805 ( 0.008) 1206 ( 0.008) 1210 (0.008) 1812 (0.012) 2220 / 2221 (0.016) l .050 .063 .080 .126 .126 .177 .225 / .225 w .040 .032 .050 .063 .098 .126 .200 / .210 t (max)* .040 .033 .055 .070 .075 .085 .108 /.108 min e/b .005 .008 .020 .010 .020 .010 .020 .010 .024 .015 .025 .015 vdcw (max) 25v 50v 25v 50v 25v 50v 25v 50v 25v 50v 25v 50v 25v 50v <----------------------------------------------------------------------------------------------cap. code----------------------------------------------------------------------------------------------> 102 <----------------------------------------------------------------------------------------------cap. value---------------------------------------------------------------------------------------------> 1000pf 122 1200 152 1500 182 1800 222 2200 272 2700 332 3300 392 3900 472 4700 562 5600 682 6800 822 8200 103 .01f 123 .012 153 .015 183 .018 223 .022 273 .027 333 .033 393 .039 473 .047 563 .056 683 .068 823 .082 104 .100f 124 .120 154 .150 184 .180 224 .220 274 .270 334 .330
ceramic chip capacitors 17 z5u dielectric note: due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. minimum order quantities may apply. * for values above 1uf, thickness may be greater than specified above. t l w end band values that are typically available. (all measurements in inches) size 0504 ( 0.008) 0603 ( 0.006) 0805 ( 0.008) 1206 ( 0.008) 1210 (0.008) 1812 (0.012) 2220 / 2221 (0.016) l .050 .063 .080 .126 .126 .177 .225 / .225 w .040 .032 .050 .063 .098 .126 .200 / .210 t (max)* .040 .033 .055 .070 .075 .085 .108 /.108 min e/b .005 .008 .020 .010 .020 .010 .020 .010 .024 .015 .025 .015 vdcw (max) 25v 50v 25v 50v 25v 50v 25v 50v 25v 50v 25v 50v 25v 50v <-------------------------------------------------------cap. code-----------------------------------------------------> 394 <-------------------------------------------------------cap. value-----------------------------------------------------> .390 474 .470 564 .560 684 .680 824 .820 105 1.00f 125 1.20 155 1.50 185 1.80 225 2.20 335 3.30 395 3.90 475 4.70 685 6.80 106 10.0f 156 15.0f 226 22.0f 476 47.0f 107 100.0f
ceramic chip capacitors 18 y5v dielectric note: due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. minimum order quantities may apply. t l w end band values that are typically available. (all measurements in inches) size 0201 ( 0.002) 0402 ( 0.004) 0603 ( 0.006) 0805 ( 0.008) 1206 ( 0.008) 1210 (0.008) 1812 (0.012) l .024 .040 .063 .080 .126 .126 .177 w .012 .020 .032 .050 .063 .098 .126 t (max)* .012 .025 .033 .055 .070 .075 .085 min e/b .002 .004 .008 .020 .010 .020 .010 .020 .010 .024 .015 vdcw (max) 10v 6.3v 10v 16v 25v 50v 6.3v 10v 16v 25v 50v 6.3v 10v 16v 25v 50v 10v 16v 25v 50v 6.3v 10v 16v 25v 6.3v 10v 25v <----------------------------------------------------------------------------------------------cap. code---------------------------------------------------------------------------------------------> 102 <----------------------------------------------------------------------------------------------cap. value---------------------------------------------------------------------------------------------> 1000pf 122 1200 152 1500 182 1800 222 2200 272 2700 332 3300 392 3900 472 4700 562 5600 682 6800 822 8200 103 .01f 123 .012 153 .015 183 .018 223 .022 273 .027 333 .033 393 .039 473 .047 563 .056 683 .068 823 .082 104 .100f 124 .120 154 .150 184 .180 224 .220 274 .270 334 .330
ceramic chip capacitors 19 y5v dielectric note: due to demand and raw material fluctuations in the market, changes and availability of individual values may occur. minimum order quantities may apply. * for values above 1uf, thickness may be greater than specified above. t l w end band values that are typically available. all components in this section are rohs compliant per the eu directives and definitions. (all measurements in inches) size 0201 ( 0.002) 0402 ( 0.004) 0603 ( 0.006) 0805 ( 0.008) 1206 ( 0.008) 1210 (0.008) 1812 (0.012) l .024 .040 .063 .080 .126 .126 .177 w .012 .020 .032 .050 .063 .098 .126 t (max)* .012 .025 .033 .055 .070 .075 .085 min e/b .002 .004 .008 .020 .010 .020 .010 .020 .010 .024 .015 vdcw (max) 10v 6.3v 10v 16v 6.3v 10v 16v 25v 50v 6.3v 10v 16v 25v 50v 10v 16v 25v 50v 6.3v 10v 16v 25v 50v 6.3v 10v 25v <------------------------------------------------------cap. code------------------------------------------------------> 394 <------------------------------------------------------cap. value------------------------------------------------------> .390 474 .470 564 .560 684 .680 824 .820 105 1.00f 125 1.20 155 1.50 185 1.80 225 2.20 335 3.30 395 3.90 475 4.70 685 6.80 106 10.0f 156 15.0f 226 22.0f 476 47.0f 107 100.0f

▲Up To Search▲

Price & Availability of C0603Z5U250-154ZNR

	To Download C0603Z5U250-154ZNR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .